The short answer: most turnovers take 1–2 hours with a 2-person team. That is what our own turnover page publishes for Miami, and its table breaks it down by size — about 1 hour for a studio, 1.5–2 hours for a two-bedroom, 2.5–3 hours at four bedrooms. The honest part of the answer is what decides where your unit lands in that range — and it is not square footage.
The published ladder, by unit size
These durations come from the per-checkout table on our Airbnb turnover cleaning in Miami page — the canonical source for both the times and the $225-per-checkout starting price. We restate it here so the answer sits next to the question.
- Studio · 1 hr
- 1 BR · 1 bath · 1–1.5 hr
- 2 BR · 2 bath · 1.5–2 hr
- 3 BR · 2 bath · 2–2.5 hr
- 4 BR+ · 3 bath · 2.5–3 hr
Notice that the column that moves with size is the time, not the price: every row starts at the same per-checkout floor. What that price buys — and why it starts where it starts — is a different question, and our turnover cost guide owns it; this guide is about the clock.
What fills that window
A turnover is not a shrunken house cleaning — it is its own discipline, built around a checkout and a check-in. The service page describes it plainly: strip and remake every bed, refresh towels, restock toiletries and coffee, clean the kitchen and bathrooms, quick-vacuum the floors, wipe counters and high-touch surfaces, and stage the unit for the next check-in — 20 items every time, closed out with guest-ready photos. If you want that list room by room, our Airbnb cleaning checklist walks the whole thing.
The two people matter as much as the 20 items. With a 2-person team, linens and bathrooms run in parallel — one person strips and remakes beds while the other resets bathrooms and the kitchen. That is the difference between a 1.5-hour visit and a whole afternoon — the published figure assumes the team.
Beds set the clock, not square feet
The turnover page says it outright: in turnover work, beds matter more than square footage — a two-bedroom that sleeps six with a sofa bed and a rollaway is more linen work than a larger home that sleeps two. Every surface somebody slept on gets stripped and fully remade; the sofa bed your listing offers as “sleeps 2 more” is, as far as the clock is concerned, one more entire bed.
And the 1–2 hour window works because of something new hosts often miss: beds are remade from the clean sets you keep at the unit. The crew strips, remakes with your fresh sets, and flags when stock runs low. A full washer-and-dryer cycle can outrun the entire visit — which is why the host who flips same-day keeps spare linen sets in the closet instead of a dryer on the critical path.
“A turnover is won on the calendar, not the stopwatch. The crew that starts on time beats the crew that cleans fast, every time.”
What stretches a turnover in Miami
Sand. In beachfront units — Miami Beach, Sunny Isles — sand control is part of every single visit, not a surprise, and the balcony area and sliding-door tracks are added on at booking. Adding them up front turns those minutes into planned minutes; discovering them on arrival is exactly the kind of time a same-day flip does not have.
The building. In condo towers — Brickell is the classic case — the service elevator, front-desk registration, and parking can cost more minutes than any room in the unit. The service page asks for exactly this: tell us the building rules when you book, so the team arrives ready instead of learning them in the lobby while the clock runs.
The rough checkout. Turnover pricing assumes normal guest use. When a checkout goes well beyond that — heavy kitchen mess, stains, party aftermath — the team documents the condition in photos, tells you what it found, and flags whether the visit needs extra time or a deep clean instead. And a unit that has sat closed between seasons — Miami humidity working on it the whole time — may need a deep clean before it goes back on a turnover rhythm; the page says exactly that.
The clock that actually matters: the checkout-to-check-in gap
Behind “how long does it take” there is almost always a second question: “will it be ready?”. On a same-day flip, the whole job has to fit inside the gap your own listing sets between one guest leaving and the next arriving — a few hours on most calendars. That window is won by scheduling, not sprinting: connect your Airbnb, VRBO, or Booking.com iCal feed and each checkout triggers a turnover automatically, with the visit on the calendar well before the guest leaves. For one-off requests without iCal sync, book 24–48 hours ahead.
The other half of the window is knowing it closed. Every eligible completed turnover includes CleanCheck photo proof — a photo audit posted to your host dashboard within an hour of finishing. You see the made beds and the reset bathrooms before your next guest walks in, whether you are across Miami or out of the country — no drive to the unit to check.
“How many hours should I book my cleaner for?”
If you hire by the hour, that question is yours to answer — and the table above is an honest starting point for it. With us, you do not book hours: a turnover is a defined per-visit job, with the duration column as the team’s plan, not a meter. You describe the unit — bedrooms, bathrooms, how it really sleeps, what the building requires — and you see your exact quote in the booking flow before you confirm. If the crew finishes in 80 minutes instead of 110, that is team efficiency, not a different invoice.
Quick answers
How long does a turnover clean take for a 2-bedroom?
The published row for a 2 BR · 2 bath unit is 1.5–2 hours. Where a specific unit lands inside that range is mostly beds and bathrooms, not square feet: the turnover page notes that a two-bedroom that sleeps six with a sofa bed and a rollaway is more linen work than a larger home that sleeps two. Tell us how the unit actually sleeps when you book and the visit is planned for it.
Can a turnover fit between a same-day checkout and check-in?
Yes — when it is scheduled before the guest leaves. Connect your Airbnb, VRBO, or Booking.com iCal feed and each checkout triggers a turnover automatically, so the visit is on the calendar well before checkout day. For one-off requests without iCal sync, book 24–48 hours ahead. Same-day flips fail on scheduling far more often than on cleaning speed.
Does the visit include washing the linens?
Beds are stripped and remade with the fresh sets you keep at the unit, and we flag when stock runs low so you can top up before it becomes a guest problem. A full wash-dry-fold cycle can outrun the visit itself, which is why hosts who flip same-day keep spare linen sets at the unit instead of betting the check-in on a dryer.
What if the guest left the unit in rough shape?
Turnover pricing assumes normal guest use. If a checkout goes well beyond that — heavy kitchen mess, stains, party aftermath — we document the condition in photos, tell you what we found, and flag whether the visit needs extra time or a deep clean instead. That photo record is yours if you need to raise the issue with your booking platform.
The short version
1–2 hours with a 2-person team for most units — 1 hour for a studio, up to 2.5–3 hours at four bedrooms, per the published table. Beds and bathrooms decide where you land, sand and the building are minutes you plan at booking, and the turnover that starts on time — iCal-synced or booked 24–48 hours ahead — is the one your checkout-to-check-in window actually needs.
This guide is part of the JAS operating playbook — written from the real clock of a Miami-Dade turnover, not from a national average.