If lines remain after using a squeegee on accessible glass, pause and inspect its rubber edge before changing the cleaning product. Look for visible damage and confirm the blade sits correctly in its channel. An edge check can identify a tool issue, but it cannot diagnose every mark or guarantee a streak-free result.
That’s the whole rule. If you’d rather not be the one auditing bottles — we bring our own, eco-friendly by default, and we follow whatever note you leave on your booking. Message us and we’ll send a price for your place.
Describe the mark before making several changes
Note whether the line appears during each pass or remains in the same place on the glass. Keep the observation simple rather than naming an unsupported cause. If you change the product, technique and blade together, you lose the ability to tell which adjustment mattered.
Inspect the edge and its installed position
Ettore identifies rounded or damaged rubber edges as a source of streaking. Check the rubber visually and compare its placement with the tool instructions. For a compatible replacement, follow the channel’s alignment and fastening directions; do not improvise a blade size or leave a retaining clip unresolved.
Stop when the observation points beyond the tool
A persistent mark on coated, damaged or unidentified glass needs the surface maker’s guidance. Do not turn a blade inspection into permission to scrape or polish the pane. Keep testing limited to safely accessible glass with an approved method, and leave uncertain surfaces for a separate decision.
The maker describes edge wear and gives channel alignment and fastening directions for its replacement rubber. Ettore: Replacement Squeegee Rubber
Published scope and the limits of this guide
The published JAS scope says: “Surface-level upkeep for homes in generally good condition. Kitchen, baths, dust, beds, vacuum, and mop.” — Read the source service page
A rubber inspection does not establish glass-restoration needs or include exterior access, scratch removal or a guaranteed finish in a cleaning appointment.
Related decisions before you schedule
Use the tool observation within a complete suitable method. Review the wider window-cleaning sequence
Those components need a different cleaning task. Keep tracks and screens separate
Specify glass work rather than assuming it is included. Confirm the window scope
Frequently asked questions
Does every streak mean the rubber is damaged?
No. Rubber condition is one observation, not a complete diagnosis.
Can any replacement rubber fit the channel?
Confirm the channel and blade compatibility and follow the fastening instructions.
Should persistent marks be scraped away?
Do not infer scraping permission from this tool check; consult the glass instructions.